What is new in GoNesting
What we have improved in your nesting, newest first, in plain words.
- Live since September 4, 2026
- 19 updates so far
- Fully launched
-
DXF files that cut in the right order
The DXF files you download are now made the way CAD and laser programs expect, so they open cleanly and every hole is cut before its part.
- FixedHoles and inner cuts come first, before the outline around them, so a part never drops out before its holes are cut. This also holds for parts inside other parts, and for co-edge jobs.
- BetterEvery outline and every hole is one closed shape, not a pile of loose lines and arcs, so your laser software sees each part as a whole.
- FixedThe files are complete in the way AutoCAD expects, so it no longer has to repair them when they open.
- BetterYour drawing's own layers are kept, and curves stay true to size.
-
Upload DWG and SVG files too
You no longer have to save everything as DXF first: DWG and SVG drawings now upload as they are.
- NewDWG files from AutoCAD and other CAD programs. They are opened on your own computer, so the DWG itself is never sent to us.
- NewSVG files from Inkscape, Illustrator and CorelDRAW, at the size the drawing says.
- BetterEvery kind of DXF is read now, including the binary kind some programs save.
- BetterWhile nesting runs, each sheet fits your screen and shows how full it is.
-
Watch your nesting work, live
While GoNesting looks for a tighter fit, you now see it happen on your sheets instead of a still screen.
- NewEvery arrangement being tried is drawn on the sheet, and parts slide as room is made for more.
- BetterThe view moves along to the newest sheet by itself. Scroll anywhere you like, and Follow live brings you back.
- BetterThe status line counts the tries, so you can see the work going on.
-
Big drawings upload without timing out
Large files could stop with a timeout while they were being read. Now they come in, right up to the 20 MB limit.
- FixedThe timeout on big DXF files. A file no longer has to be read in one long wait.
- BetterFiles send much faster, because they are packed first, and a dropped connection simply tries again.
- BetterSeveral files go one at a time, so a problem with one never holds up the rest.
-
Your finished layout is always safe
Saving a layout could fail with "Could not save", most often on big jobs. We rebuilt how saving works, so a finished layout is no longer at risk.
- FixedThe "Could not save" error after a nesting. Big layouts now save in about a second.
- NewIf your internet drops while saving, GoNesting keeps trying by itself until it works.
- NewRefresh the page or sign in again and your layout is still there, without using another nesting.
- BetterYou stay signed in while a big job runs, however long it takes.
-
A bigger leftover piece to keep
On your last sheet, the parts are now packed together at one end, so the rest stays as one clear piece for your next job.
- BetterOn one real job, the clear piece grew from about a fifth of the sheet to nearly half.
- NewA piece worth keeping is marked with its size on the sheet and in your report, so you know what you can reuse.
- BetterThis step adds a few seconds, or longer on very big jobs. Stop always keeps the layout you already have.
-
Clearer reports and safer uploads
Every part now has its own name in your report, and one bad file no longer spoils the rest of an upload.
- FixedWith several files, the report could show different parts as one "Part 1". Each part now has its own line, with its file name.
- FixedA drawing with a broken measurement could stop the whole upload. Now only that file is refused, and you are told why.
- BetterChanging the unit of a very large drawing is less likely to fail.
-
See your design's true size when you upload
Each file you upload now shows its size and unit, so you can check it was read correctly before you go on.
- NewUnder the file name you now see the design size, such as 800 × 500 mm, or 4 × 2 feet with the millimetres beside it.
- NewIt also says whether the unit was saved in your drawing.
- BetterA drawing with no unit saved is now always read in millimetres.
- NewPick the unit yourself for any file: mm, cm, m, inch or feet. If a drawing has the wrong unit, you can fix it before you go on.
-
Parts in a cut-out stay clear of small holes
If your drawing has a small hole overlapping a bigger cut-out, parts placed in that cut-out now keep clear of it.
- FixedA small hole's cut line could run through a part nested in the cut-out next to it. The part now goes somewhere safe.
- BetterDrawings without such holes nest exactly as before.
-
No more lonely parts on an extra sheet
When the last sheet would hold just a part or two, GoNesting now makes room for them on the earlier sheets, the way you would by hand.
- BetterParts left on their own are slid into room made on the earlier sheets. On mixed orders this often saves a whole sheet.
- BetterWith AI Smart Rotation, every part gets the angle that suits it: a hook at 45°, the plate next to it square.
- BetterThe last step can take a few seconds longer. Stop always keeps the best layout found so far.
-
Big jobs run smoothly
Very large jobs work on everyday computers now, and uploads are more reliable.
- FixedVery big jobs no longer crash the browser with an Out of memory message.
- FixedBig layouts can be saved and exported again.
- FixedDrawings with special characters in their name, such as 12'' plate.dxf, upload normally.
-
A new nesting engine that uses fewer sheets
We rebuilt the part of GoNesting that places your parts. It tries many complete layouts at once and keeps the one that uses the least material.
- BetterBig jobs need fewer sheets.
- BetterMany copies of the same part are packed in neat, interlocking rows.
- BetterParts on the last sheet are moved into empty space on earlier sheets wherever they fit.
-
Exact sizes you can trust
The gap, the edge margin and the sheet size you type are now kept exactly, on straight edges and curves alike.
- BetterThe gap between parts and the margin from the edge are never smaller than you asked for.
- BetterSheet sizes with decimals, like 1219.2 mm, are used exactly as typed.
- FixedThe number of sheets you enter now counts. If a job needs more, the result tells you.
- BetterNesting fills one sheet at a time, so you see each sheet the moment it is ready. If an older drawing asks to be uploaded again, it is so it can be read this new, exact way.
-
Much faster nesting
The same layouts as before, in a fraction of the time.
- BetterNesting is 5 to 30 times faster. A job of 960 parts that took 12 minutes now takes about half a minute.
-
PDF reports, and better reading of your drawings
GoNesting finds the parts in your drawing more reliably, and every job gets a report.
- NewEvery saved job gets a PDF report with a picture of each sheet. Download it from History.
- BetterParts are found correctly in many more drawings, including complicated ones.
- FixedDrawings made in inches or other units come in at the right size.
- FixedExported DXF files open cleanly in more programs.
-
AI Smart Rotation
A clearer list of rotation choices, and two extras for Pro.
- NewAI Smart Rotation tries several ways of turning your parts and keeps the tightest result.
- NewCo-edge cutting (touching parts share one cut line) and 360-angle rotation are Pro features.
-
Tighter layouts and a smarter cutting order
More parts per sheet, and less time on the machine.
- BetterMore copies of the same part fit on each sheet.
- BetterExported files cut in a smart order: holes first, then outlines, with less travel between parts.
- FixedSmall parts go into the slots and holes of bigger parts instead of onto a new sheet.
- BetterLong, thin parts nest much faster.
-
More parts on the same sheet
Two changes that simply fit more, with nothing new to learn.
- FixedParts sit closer together: we removed extra space around every part that nobody asked for.
- BetterBoth ways round are tried, so 1200 × 800 and 800 × 1200 give the same result.
-
GoNesting goes live
Upload a DXF, pick your sheet, and get a layout you can cut — in your browser, with nothing to install.
- NewTrue-shape nesting: parts are placed by their real outline, so shaped parts fit closely together.
- NewSix simple steps: upload, pick parts, choose sheets, check settings, nest, download.
- NewSmall parts are placed inside the holes of bigger parts, so less material is thrown away.
- NewDownload the finished sheets as DXF files, ready for your machine.
Something you want changed?
Tell us what your files do that GoNesting handles badly — that is where most of the list above came from. Write to info@gonesting.com or use the contact form.